China Standard Pig Equipment Fiberglass Conical Fan/Pig Farms Fan/ Poultry Ventilation System with Hot selling

Product Description

36″,51″,54″56″Fiberglass fan
 Product Description:

51″,54″Cast aluminum/Nylon blade Belt drive Fiberglass Fan
1.Integral molded fiberglass reinforced shell, the inner surface and the outer surface are both smooth
and flat,streamlined appearance design,low wind resistance,high energy efficiency,corrosion resistance easy to clean up without breeding bacteria;
2.Split type fiberglass reinforced blades, light weight, fan running more stable,small vibration, low noise
high energy efficiency, no rust in use life.
3.Special large pulley design with vary advantages of simple structure and maintenan ce-free bearing
4.Spring-loaded tensioner ensures belt tension and improves operating efficiency
5.Cast iron pulley with high strength, wear resistance, and long life.
6.Imported V-belt(Conti/Mitsuboshi),small deformation,long life
7.Alternative motors,such as Siemens,Speecon and so on.
8.Two kinds of optional cone fan: PE rotational molding and hand lamination fiberglass.

Fiberglass  Fan Technical parameters

name Motor Rated Power Static Pressure Pa 0 12 25 37 50 Installation Open (mm)
in.H2O 0 0.05 0.1 0.15 0.2
51″Fiberglass Cone Fan(Cast aluminum blade Belt drive ) 1.1KW Capacity m³/h 46700 43800 41100 37400 31600 H*W:1450*1450
cfm 27500 25800 24200 22000 18600
Energy Efficiency Ratio m³/h/W 33.4 30.3 27.7 24.6 20.5
cfm/W 19.7 17.8 16.3 14.5 12
54″Fiberglass Cone Fan(Cast aluminum blade Belt drive ) 1.5KW Capacity m³/h 57800 54300 51000 46900 43000 H*W:1620*1620
cfm 34000 31900 30000 27600 25300
Energy Efficiency Ratio m³/h/W 32.6 30.6 28.5 26.2 23.8
cfm/W 19.2 18 16.8 15.4 14

Partial view of fiberglass cone fan

          51/54 inches Cast aluminum blades fan                                               51/54 inches Cast aluminum blades fan          

Production base

Pig house ventilation environmental control system

About us:

HangZhou Farm Lyric Agri-tech Co., Ltd. is located in HangZhou, a port city in ZheJiang Province, China. Our factory is 40 kilometers away from HangZhou port and 30 kilometers away from HangZhou HangZhou International Airport. The company is mainly engaged in the research and development, design, production, installation and service of CZPT and poultry breeding products. Automatic feeding system, automatic drinking water system, ventilation and cooling system, environmental control system for main pigs, cattle, sheep, chickens and geese. In addition, the company also produces steel structure products, mainly used in the engineering design and construction of modern breeding farm.
We have a first-class RESEARCH and development team, first-class process machines and injection workshop, all research and development, injection are completed in our own workshop.
In this case, we can control the quality ourselves and provide custom designs.
As a result, Haimu has been well received by customers around the world.
First-class service, first-class products, first-class management, first-class engineering is our permanent purpose.

Our advantages:

1. Your enquiry will be answered within 24 hours
2. One-stop purchasing experience
3. Customizable design
4. Our professional team will provide you with the most suitable farm solutions and the shortest delivery time.
5. Professional quality control system and after-sales service system
6. Service life of equipment: more than 10 years

FAQ:

Q1. What are the packing terms?
A: Standard export packing or according to your requirements.
Q2. What are your terms of payment?
A: 30% T/T as deposit, 70% before delivery. During the preparation period, we will report the progress of preparation to you every day, and send progress photos.
Q3. What are your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. What are your delivery times?
A: For regular products, it will take 10 to 15 days after receiving your advance payment. The exact delivery time depends on the goods and quantity you order.
Q5. Can you produce according to the sample?
A: Yes, we can produce according to your samples or technical drawings. Of course, the cost of making molds and fixtures is negotiated by both parties.
Q6. What is your sample policy?
A: We can provide regular samples, but the customer has to pay for the freight. The cost of expensive samples should be shared by both parties.
Q7. Do you test all goods before delivery?
A: Yes, we do 100% test before the goods leave the factory.
Q8: How do you maintain a long-term good relationship with our business?
A: 1. We will provide the most competitive price and quality to ensure our benefits to you;
     2. No matter where you come from, we are all friends and family. We will do our best to help you.

   

What to Look for in a Belt Tensioner

If you notice the power steering, air conditioning, or power steering stops working, chances are that your belt tensioner has been compromised. A compromised belt tensioner can be completely destroyed overnight, or it can last for a long time before it breaks. Either way, you should never drive with a faulty belt tensioner. It’s far better to have it replaced before the engine shuts down completely. In addition, replacing a belt tensioner will prevent other complications, such as power steering or air conditioning, from occurring.
belt

Misaligned idler pulley

If the tensioner arm is not rotating freely or has an abnormal chirping noise, it could be the result of a misaligned idler pulley. If this is the case, replace the idler. If the idler does not move, you may need to adjust the accessory mount points or use a laser alignment tool. The tensioner arm is only 1 part of the tensioner.
A misaligned idler pulley on a belt tensioner is usually the cause of a squeaking noise. If this noise continues even after a replacement of the belt, it’s time to replace the whole belt. A misaligned idler pulley can also be the cause of premature belt wear. If the idler pulley is out of alignment, it could also cause the belt to wear too fast and lead to the premature failure of the timing belt.
The tensioner pulley is made of nylon, steel, or plastic. It may be flat or grooved. Before replacing it, check for any cracks, dents, or debris on the pulley’s surface. Plastic pulleys may have broken sidewalls. If the idler pulley is worn out, you might also notice squealing noises when the vehicle is in motion.
The misalignment of a belt is most pronounced when the span between the 2 pulleys is short. When the span is long, however, diagnosing the problem becomes more complicated. Small degrees of offset may not be visible to the naked eye, but a laser alignment tool can help identify these subtle variations. In order to identify a misaligned idler pulley on a belt tensioner, you must first determine its cause.
When the tensioner’s idler pulleys are out of line, a belt tensioner will not be able to properly adjust the torque that the belt is under. This may result in squealing noises. If this is the case, it is time to call a mechanic. He or she will be able to determine the cause and correct it. If you suspect the problem, your next step is to replace the idler pulley on the belt tensioner.
If the ribbed belt is not properly aligned, you may have a misaligned idler pulley. To fix the misalignment, locate the belt adjustment bolt underneath the hood. You should be careful not to damage the alternator or battery terminal while doing this task. If you do accidentally connect the battery positive to the earth, you might be able to damage the ribbed belt and ruin your vehicle’s timing.
Besides a misaligned idler pulley on the belt tensioner, another problem may be the alternator’s serpentine belt. If your car’s alternator belt is not aligned properly, you could have misaligned the alternator’s pulley or a worn-out bearing. Regardless of the cause of your problem, you should have the belt inspected.
belt

Bad idler pulley

Having a Bad Idler Pulley on a Belt Tensioner? If this sounds familiar, then it’s probably time to change it. Idler pulleys slowly take hits while the engine is running, causing the belt to wrap and bend. Eventually, the belt will slip, and a new idler pulley should be installed to ensure optimal tension. But before you spend a dime on a new one, let’s talk about what to look for.
Symptoms of a Bad Idler Pulley: If the noise persists, there is a problem with the idler pulley or its bearing. These parts wear out over time and may eventually cause a cracked idler pulley or serpentine belt. Not only will the idler pulley create an irritating noise, but it will also damage the belt itself, leading to overheating, stalled engine, and even damage the head gaskets. Thankfully, a Bad Idler Pulley on a Belt Tensioner is easily replaced and will only cost about $40.
Although the Idler Pulley is not the most popular component on a car, it’s a critical part that ensures that the engine runs smoothly. It’s easy to overlook this part, but its failure can make it impossible for your vehicle to operate at its optimal level. Moreover, a Bad Idler Pulley on a Belt Tensioner will cause your engine to malfunction, so it’s essential that you check it at regular intervals.
If you notice a squealing noise while driving, the Idler Pulley is likely the culprit. Because of friction between the engine belt and idler pulley, the engine belt rubs against the pulley, causing it to squeak and make a clicking noise. This squealing noise will continue until the problem is repaired or replaced. It’s time to start addressing the problem before it becomes too late.
If you notice the tensioner pulley moving away from the engine, it’s most likely that the pulley is malfunctioning. A belt that is loose or slack may make it difficult to start the car, or your engine may even overheat. If this occurs, it’s crucial to replace the Idler Pulley as soon as possible, because a Bad Idler Pulley on a Belt Tensioner can seriously damage your vehicle.
The Idler Pulley facilitates the motion of the engine belt. It serves as a smooth rotating point that allows the belt to loop without a barrier. Over time, this part of the system will begin to show signs of wear and tear, and replacement is vital to protect your engine, serpentine belt, and other accessories. An early warning sign of a problem is a squealing sound coming from the engine area.
belt

Broken tensioner arm

The belt tensioner is a piece of machinery that is used to keep the belt tight. If this part breaks, you can easily repair it yourself using a long-handled ratchet, serpentine belt tool, or a socket. To repair the tensioner, simply remove the drive belt from the pulley and rotate it to release tension. Check for roughness, resistance, or binding of the drive belt.
Noises caused by the tensioner are a sign of a damaged component or excessive oscillation. These noises are usually caused by worn internal components or the tensioner’s pivot bushing. In some cases, the vibration damping system or a worn-out alternator pulley could also be to blame. If this is the case, replace the pulley and tensioner together. To check the condition of your belt tensioner, follow these steps.
In addition to worn-out springs, a loose or broken pivot arm could be causing your belt to misalign. A worn-out tensioner pulley bushing will also cause vibrations, noise, and seizing. Lastly, a broken tensioner spring could be preventing the belt from maintaining proper tension. Broken springs are also prone to loss of tension due to heat. Damaged tensioner housing can also affect belt tension.
Once the belt is installed, you need to check the condition of the pulley and the tensioner arm. Make sure that the pulley is moving and that the arm is moving smoothly with the cranking and releasing. If the arm is wobbling, the tensioner is failing. If the pulley wobbles or excessive chattering occurs, the tensioner is failing. It can also be seized or jammed.
If the tensioner arm has broken, replace it. Replacing the tensioner can be a tedious task. Be sure to use a suitable tool to tighten the pulley and tensioner. If you are not sure of how to replace the pulley, try using a serp belt tool. Another good option is to purchase a 3/8 drive ratchet. If you don’t have this tool, you can use a long 3/8 extension and a deep socket.
The belt tensioner assembly can fall off the engine, causing damage to the timing belt. If you are replacing it, you must replace it with a new one, and tighten all of the mounting bolts before reinstalling it. To avoid further damage to the engine, ensure you replace the belt with a new tensioner and a new belt. The tensioner is bolted to the engine’s timing cover, so make sure you carefully tighten the bolts when replacing it.

China Standard Pig Equipment Fiberglass Conical Fan/Pig Farms Fan/ Poultry Ventilation System     with Hot sellingChina Standard Pig Equipment Fiberglass Conical Fan/Pig Farms Fan/ Poultry Ventilation System     with Hot selling