Automatic outer ear-loop mask making machine
A. Machine information
1). Machine parameters:
Voltage: 220V, 50Hz
Output power: 12KW
Mask type: 2/3/4 layers nonwoven flat face mask
Mask size: 95*175mm
Capacity: 90-120 pcs/min, can be 24-hour continuous operation
I: Auto Material Feeding System
1. Aluminum alloy frame, steady and beautiful in outlooks which will ensure the size of the finished products accurately.
2. Stainless steel fixture, can adjust the size of the material freely.
3. Tensioner wheels which can keep the finished masks blank to be flat and smoothly.
4. Independent nose-clip feeding system, convenient for adjustment and maintenance.
5. Compact and smart design, small in size, which will be space saving;
6. Mitsubishi PLC control, with high stability and lower error rate
7. Adopt high grade Aluminum alloy structure, carefully produced by CNC machining center, beautiful in appearance and rust-proof
8. ZheJiang ultrasonic system, high-quality photoelectric detection, stable performance, lower error rate
9. Adopt alloy mould, durable and wear proof, ear-loop weld strength is better and adjustable
II: Folding and Forming System
1. Insert chips folding device, easy and convenient for adjustment.
2. Large diameter welding roller, effectively reduce the deformation of the finished products.
III. Mask blank transport
1. Imported ultrasonic transducer, frequency is 20 KHz as the international standards; the output power will be more strong and steady. Two sets of ultrasonic system, which will ensure the welding effect of the finished masks.
2. PLC controller, reduce the use difficulty of operation.
3. The complete machine control device is connected with position sensor.
Control panel: Mitsubishi PLC program control, both Chinese and English Displaying ; the control procedure of this machine was developed by ourselves and after repeated testing which will ensure the high precision and high stability working.
Era-loop weld: adopt high quality press device, avoid deviate, adopt alloy welding head, durable, and excellent welding effect.
Material quality: adopt imported high-quality steel and aluminum concentrate , precision processing by CNC, look beautiful, and more durable.
Mask blank feeding: precision limiting according to the exact size of the mask blank which will ensure the mask blanks won’t occur line deflection during the processing and ensure the beautiful appearance of the finished products.
IV. Finished Product:
B. Wastage Component normal usage life and warranty:
1. Oscillation: Life time 2-5 years,warranty 12 months
2. Horn: Life time 2-3 years,warranty 3 months
3. Transducer: Life time 2-5 years, warranty 6 months
3. Cutting Knife: Life time 1~2 years, warranty 3 months
remark:1 year warranty of machinery for normal usage except for non-force majeure
1. Feeding Rack : 1 Set ( Max 4 rolls of raw material)
2. Mask blank production part: 1 Set
3. Blank transport part: 1 Set
4. Ear-loop welding part: 2 Sets
5. Finished mask conveyor: 2 Sets
D. Main Parts
|Factory own brand
|Factory own brand
E. Spare Parts:
1. Relay: RM4S-U DC 24V 5pcs
RM2S-U DC 24V 5pcs
2. Fuse 20pcs
3. Fan: SJ92571HA2 AC 220V 2pcs
4. Ultrasonic component:
5. Proximity Detector: QL-08N 4pcs
6. Blank cutting knife: 2
7. Ear-loop cuter: 4
8. Ear-loop welding head: 4
Types of V-Belts and Their Properties
A v-belt’s inside length and pitch are determined by measuring along the bottom side. The included angle of a v-belt is measured from its flanks when it is extended. Most v-belt sections are 40 degrees. There are different types of v-belts, and the dimensions of each are standardized by different organizations. This article will introduce the different types of v-belts and their properties.
Notched v-belts reduce bending stress
Notched V-belts reduce bending stress by reducing the axial length of the belt by 2 or more notches. These notches are characterized by different profiles, which differ in the pitch angle and the inside length. ISO and DIN standards are followed by the manufacturers of these belts. Notched v-belts are used on industrial machinery in countries other than the US.
Compared to the standard V-belts, notched ones are designed to resist bending stress better and offer better heat dissipation. They also last longer and run cooler than standard V-belts. Furthermore, they are about 2 percent more energy efficient than their standard counterparts. Therefore, notched V-belts are a viable replacement for standard V-belts.
Notched V-belts are commonly used in industrial applications because of their low price, ease of installation, and availability of many sizes. Another advantage of notched V-belts is that they provide more wedging force and higher load capacity. Notched V-belts have a wider v-groove than flat ones, which makes them more effective for heavy-duty applications.
Notched V-belts also provide better traction. They reduce bending stress, which is beneficial for preventing fatigue and tearing of v-belts. Additionally, v-belts can be installed in an existing equipment to add more performance. And with proper maintenance and installation, notched V-belts will provide trouble-free service for many years to come.
Ribbed v-belts reduce heat dissipation
Various kinds of v-belts are available for varying applications. The more popular types are the fractional horsepower and the double-V. Fractional horsepower v-belts are designed for light-duty applications, such as machine shop equipment and household appliances. The common sectional names are 2L, 3L, 4L, and 5L. The L in each of these belts refers to the top width of the belt, multiplied by 1 eighth inch.
Unlike conventional belts, ribbed v-belts are flexible, making them ideal for use in vibrating loads. They reduce heat dissipation and can be ordered in single or multiple sets to match your application. However, ribbed v-belts should not be mounted on deep-groove sheaves, as this can cause the belt to turn over. If you use deep-groove sheaves, the risk of rupture is very high. Deep-groove sheaves can also cut banded belts. Extremely worn sheaves can also cause the belt to rip.
The 2 types of ribbed v-belts differ in their construction and application. While both types have trapezium cross-sections, they are similar in that they are made of polyurethane or other durable materials. Ribbed v-belts have an additional layer of fabric on the elastomer core for reduced noise and better heat dissipation.
Ribbed v-belts are available in a variety of sizes, including trough v-belts. Their cross-sections are categorized by their top and bottom widths and depths. The included angle of most v-belt sections is approximately 40 degrees. Different types of v-belts have different cross-sections, and these cross-sections are standardized by various organizations.
As the load increases, a ribbed v-belt will wedge into the groove and decrease the amount of friction needed to maintain the correct torque. Flat belts can track off the pulleys due to friction. However, V-belts are more stable and require less width than flat belts. The main advantage of ribbed v-belts is their increased efficiency.
The global-local finite-element model is also used to calculate the maximum and minimum J-integrals during a belt’s running cycle. The data is then used to evaluate the durability of ribbed v-belts in various applications. The numerical models used for the calculations involve a ribbed V-belt with 5 full ribs.
Cogged v-belts increase lateral rigidity to reduce belt whip
Cogged v-belts are designed for maximum performance and durability on even the harshest drive systems. These belts are made from high-modulus polyester cords that resist hardening and stretch and provide superior balance and strength. They also feature raw-edge sidewalls to reduce slip and drive vibration. In addition, they have specially-formulated rubber compounds for oil resistance. CZPT Cog-Belt offers substantial savings in downtime, energy consumption and horsepower.
A double cogged v-belt combines the benefits of cogged and double vee-belts. Its bonded reinforced tie band offers enhanced flexibility and reduces belt whipping in multiple-belt drives. Double cogged v-belt dimensions vary depending on the standards of the manufacturer. Regardless of the type, you’ll want to use a belt that is aligned correctly.
Standard v-belts are also known as wrapped or raw edge v-belts. Wrapped V-belts feature fabric covers above and beneath the cord to increase lateral rigidity and reduce belt whip. Cogged V-belts also have fabric covers to prevent wear on the core and increase the belt’s operating temperature. They’re ideally suited for applications that require high-temperature operation.
Cogged V-belts can significantly decrease energy consumption and improve power transmission capabilities. They also have a bias-cut cover stock that provides axial and lateral stability while preserving the cord integrity. A fiber loaded cogged construction offers optimum flexibility while minimizing heat buildup. It can be installed on any type of drive, including chain conveyors and industrial-grade machines.
The two-layer tie-band permanently bonds multiple belts together. This provides maximum cord support, heavy shock absorption, and stability. The belts are also engineered with patented banding processes that eliminate belt turnover and distribute load evenly across the drive. CZPT Cog-Band Belts minimize belt whip and provide stability. They also minimize belt turnover and rollover in heavy-duty industrial applications.
A classic v-belt is the most common and economical belt. Its nominal dimensions are 1/2″ to 1-11/2″ wide and 16″ to 400 inches long. The width is usually 40 degrees. Different organizations use different cross-sections to classify v-belts. The following table provides a general comparison of the 2 types. The Cogged V-Belt is designed to reduce belt whip by increasing the lateral rigidity of the belt.
Cogged v-belts provide superior environmental resistance
The patented design of the Dayco V-Belt provides maximum power transmission while combining the benefits of a cogged belt and raw-edge construction. The belt’s top cogged design helps increase air flow around it, preventing deterioration and extending its useful life. The belt’s three-ply design features neoprene impregnated fabric for superior durability and a specially-formulated polyester cord for increased strength and stability.
A variety of v-belts are available, with cogged and notched versions presenting unique characteristics. Cogged V-belts are more flexible than uncogged versions and feature ‘X’-shaped grooves for enhanced heat dissipation. Cogged V-belts are interchangeable with conventional v-belts, although their ‘X’ design is most common. Hexagonal v-belts are a popular option for applications where traction is needed.
Another type of Cogged V-belt is designed specifically for outdoor power equipment. This v-belt is brown, with smooth clutching covers. Its aramid cord is very strong and provides superior durability in adverse conditions. Cogged V-belts can withstand severe shock loads and are therefore ideal for outdoor power equipment. Furthermore, they offer superior environmental resistance, minimal stretch, and a long service life.
A Cogged V-belt is composed of tensile cords that are supported by a rubber stock. Different manufacturers use different synthetic rubber stocks for this purpose. These materials help to extend the belt’s operating temperature range and resist premature failure. In addition to tensile cords, the belt’s body is covered with a fabric cover. The fabric is treated to form a chemical bond with the core materials, which allows it to withstand constant bending.